Manual for: AGCO White Tractor
Format: PDF
Book Number: 1857089M1
English
AGCO White 6410, 6510 Service Tractor Manual
Manual TABLE OF CONTENTS
Introduction, Safety, Notes, etc
General Specifications
Splitting the Tractor
Engine
Clutch
Gearbox
Rear Axle
Power Take off
Front Axle
Hydraulics
Electrical System
Electronics
Cab & Sheet Metal
Accessories
Service Tools
White 6410, 6510 Manual Extract
OIL SUPPLY CONTROL VALVE
Dis-assembly
1. Disconnect the two hydraulic hoses.
2. Remove the clevis pin cylinder to operating lever.
3. Remove the spring clip from the valve spindle pivot.
4. Remove the cylinder assembly.
5. Remove the circlip .
6. Pull the valve assembly out of the cylinder.
7. Remove and discard the ‘O’ ring in the cylinder body.
8. Remove the crimped clip on the end of the spindle.
9. Remove the valve components; valve, spring, washer and spindle.
10. Remove the internal ‘O’ ring and discard.
11. Remove the wiper seal and discard.
Examination
Clean all the components and check for wear replacing any worn components. Ensure that the valve seat in the cylinder and on the spindle is in good working condition.
Check that the valve slides freely up and down the valve spindle.
Reviews
There are no reviews yet.